Eruption------------81 JCM 800

c2dzmm · 07-04-2006, 10:20 AM

Hope you like.

wahwah · 07-04-2006, 10:38 AM

That phaser is too much mate...can't make out a lot of what appears to be a pretty close take. Reduce the phase somewhat and repost...

Bahamut · 07-04-2006, 11:29 AM

Yeah no disrespect m8 but can't hear jack , only for the high notes, reduce the phaser somewhat

**Culpster** · 07-04-2006, 01:25 PM

Sounds to me like you have it down but it is very hard to hear, very digitized and scratchy. From what I can make out, it sounds like you have it....post another up....would be great to hear.

MuRpH · 07-04-2006, 02:30 PM

ditto

**supercharged 350** · 07-04-2006, 02:45 PM

From what I can hear it sounds like you played it well. I have to agree about the phaser.

**CanyonCarver** · 07-06-2006, 01:52 PM

Yep, the Phase is too strong. Otherwise, good Eruption. More and much better than I can pull off.

c2dzmm · 07-07-2006, 11:48 PM

thanks for the advice--gonna roll off the phase and try to figure out how to get rid of the solid state sound---I tell you this free recording program from the net doesn't do my 81 JCM 800 justice---just can't tell you how much different the tone actually is--just different.

**bluesplayer** · 07-12-2006, 10:58 AM

Sounds like the distortion is a little too hot and toppy , and the Flanger is set too wet . The notes and playing sound way cool , just needs fine tuning .

guitaral · 07-26-2006, 02:34 PM

are you running the amp right into the computer or miking it up? also, what is your low/mid/high setting at? (gain level too)

Have to agree