DOD pedals

bluepowder · 03-31-2005, 12:11 AM

hey guys,
i got 4 DOD single effect pedals-overdrive,chorus,digidelay and grind distortion...got them almost free...but there seems to be no power supply around that powers all of them

....anyone know of an adaptor that powers all 4 pedals or anything else i can do

bluepowder · 04-01-2005, 04:25 AM

cmon guys any help??

picone244 · 04-26-2005, 09:56 AM

I've never tried it, but it looks like it will work for you

http://www.musiciansfriend.com/srs7/...se_pid/155051/

It comes with a 5 connector daisy chain, so it will power the 4 pedals, plus have room for another before you'd have to buy more connectors, and it works on a lot of different brands.

Hope this helps...

Rythameen · 04-26-2005, 10:09 AM

1 Spot from www.visualsound.net Great little power supply.

gone_fishing · 04-29-2005, 12:26 AM

Quote:

Originally Posted by bluepowder

hey guys,
i got 4 DOD single effect pedals-overdrive,chorus,digidelay and grind distortion...got them almost free...but there seems to be no power supply around that powers all of them

....anyone know of an adaptor that powers all 4 pedals or anything else i can do

i have 1 dod pedal and i couldn't find an adapter either so i found a transformer that went from xxx-9v and cut off the bit where the 9v battery connects to in the pedal then connected the positive and negative wires of the power cord to the positive and negative wires in the pedal that were still there that used to be connected to the bit where the battery connects to.
sorry its a bit confusing but its a bit hard to explain. so if you can't find an adapter just do that

buzz77 · 04-29-2005, 06:47 AM

Just go to your local music store and tell them what you need and they will have it. Its one package including the adapter and the daisy chain. Its fairly cheap also.

kleintools · 02-26-2009, 04:22 PM

Im looking for the DOD PS50 to power my ThrashMaster, SuperAmericanMetal, and all my other older DOD FX pedals but all that Im able to find is the DOD PS125 adapter. I dont want to take a chance of frying the pedal with the wrong size adapter. The bottom of the pedal says 10volts but the PS125 is a 9volt can any one help? Thanks

gone_fishing · 02-26-2009, 07:55 PM

As long as the adaptor is the same voltage it will be fine. The bigger one will just have the ability to supply more current. Just make sure that they are the same voltage

This should work