Sorry for my english.
I have a question that i can not solve searching in forums.
I connect my guitar to Line6 Pod 2.3. On the Pod 2.3 for connect it to PC, i donīt know if use the "headphones" output, if use only the "left" output, or use two cables on the "left" and "right" outputs respectively and connect it to adapter 2xjack 6.35mm/1xjack 3.5mm to connect the Pod to the PC through the "Line In" sound card entry, for that the
Guitar Rig 3 to sound in stereo (in the Guitar Rig the "left" channel always shows sound, but the "right" channel appears without sound, unless you press the button "Both", but in this case i think that the signal on "left" channel is duplicate to the "right" channel).
Also i donīt know if the adapters that i use jack 6.35mm/jack 3.5mm and 2xjack 6.35mm/1xjack 3.5mm has been mono, stereo, or converter stereo to mono, or converter mono to stereo (i donīt know if the both converters exists). I read something out there about cables Ts or TRS but i donīt know if they are i need it.
Thank you.
Linear Mode
