Guitars101 - Guitar Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
733 Posts
are u saying it wont fit in the cavity in the wood? that can be fixed easy. just carve some of the wood out of the way. take knife and whittle it off till it fits. or sand it, or route it out. its going to be under the pickguard...no one will see the cuts.
 

· Registered
Joined
·
733 Posts
im looking at the jag now and i see what you mean. if you could get some full sized ones with 4 conductor wire that can split, that would give you some serious combinations with all the switches it has now.. :wtf: :jam:
of course if you can find a way to cut the wood under the pickguard without it being seen i would do that...would be less trouble than cutting holes for HBs.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top